Automotive Window Tint Care and Maintenance
Once window film has been installed, it is very common to see a slight haziness and/or small water pockets. This is a normal part of the adhesive bonding process called "curing". Depending on the film type and weather conditions, it may take up to 30 days for the film to be fully cured. The curing process is slow because the remaining water used in installation must evaporate through the film. Sputtered and heavy security films take the longest to dry and will take longer for any hazy appearance to disappear.
Do not roll down your windows for at least 48 hours after tint is applied.
Once the film is dry and cured, it is then safe for the film to be cleaned. The best cleaner is a simple solution of water and a small amount of soap. Clean the window and then squeegee dry with overlapping strokes in the same way you would clean the outside of your car windows. You may also clean the film surface with any normal strength glass cleaner. Products with ammonia will not damage the film if used in reasonable quantities and if the film is not left to soak in it. Do not use any abrasive cleaners, industrial strength glass cleaners and/or any other window cleaning tools that may scratch the window film. Remember, the surface of the film is coated with a scratch resistant not scratchproof coating.